Lifts of Texas

562 South Hwy 123 Bypass
Seguin , TX 78155
ph: 830-225-8444
daniel@liftstexas.com

Indoor elevators

Residential

Elevators

WD 9500
Residential Elevators

A precision helical beveled gear-motor assembly is mounted at the top of the guide rails. This machine assembly raises and lowers the elevator via two 3/8” elevator grade steel cables. The motor and brake are controlled using a Variable Frequency Electronic Drive System that ensures excellent ride quality and low noise levels. Electric door locks and gate switches ensure the safety of the passengers inside the elevator and bystanders at the floor levels.

The WD 9500 is perfect for coastal installations or where there is a risk for potential flooding.

Benefits of Our WD 9500:

Smooth and Quiet Ride Compared to Other Elevator Systems.
Less Maintenance than Other Elevator Systems.
Most Electrical Equipment at the Top of Elevator Shaft so Less Expensive if Impacted by Flooding.
Our Winding Drum Elevators do NOT Require a Machine Room (Takes up Less Space in your Home!)

Travel Speed of 40 fpm (nominal)
Standard cab size 3’x4′. Additional sizes available
Standard cab interior height 6’8″, 7’0″ or 8’0″
Electromechanical door interlocks
Broken cable type “A” instant safeties
Optical landing system
“Sleep mode” to conserve energy and component life when elevator is not in use.
Aluminum platform and rail brackets
Load capacity of 950lbs
Recessed lighting, automatic
Stainless steel fixtures
Concealed telephone for emergency communications
Travel distance up to 48’5″
Overhead clearance requirements – 6’8″ cab requires 102″, 8’0″ cab requires 117″ (measured from top landing floor level to lowest point in the elevator shaft)
Controller supports 4 landings standard, 7 landings optional
Automatic 2nd level homing (after 20 minutes, elevator will automatically move from the 1st level to the second level.)
All safety features required by ASME A17.1, section 5 (National Elevator Code)
ETL listed controller
Best warranties
Local
We service